Skip to main content

Characterize photonic integrated circuits (PIC) with automated test stations

From wafer testing to optical sub-assembly and module qualification—an integrated, seamless and fast approach to testing silicon photonics.

Challenges

Accuracy/repeatability: Obtaining traceable results—through high-precision alignment and measurement—for tighter acceptance thresholds and greater yield of known good dies, with more confidence in design and process optimization decisions.
Dynamic range: Seeing full optical spectral contrast in a single measurement.
Speed: Keeping alignment and measurement time to a minimum, but also accelerating the ease of the test and analysis iterative flow.
From data to insight: Generating and managing structured data that is ready for artificial intelligence and business intelligence.
Flexible/scalable: Leveraging test station modularity and third-party compatibility of software to improve test throughput and complexity over time or swap equipment as needed.
Automation: Leveraging automated chip and wafer advanced navigation, coupled with the freedom of controlling any instrument and executing data analysis in user-defined test routines to test massive circuit amounts with minimized cost of ownership.

Optical testing solutions for universities and labs

Explore our industry-leading portfolio of optical testing solutions for universities and laboratory applications. This brochure provides an overview of our comprehensive range of optical testing solutions including component test platforms, optical testing solutions, light sources, benchtop tunable lasers, passive component testers, optical spectrum analyzers, tunable filters with adjustable bandwidth, variable attenuators, switches and power meters.  

Read the brochure

Description

Driving the development of high-speed networks and 5G, photonic integrated circuits (PICs) are a well-known technology in the telecom world—mainly thanks to the frantic development of transceivers and passive components that are smaller, faster, cheaper and greener than their bulk-optics counterparts. PICs are also getting traction—both from a commercial and research perspective⁠—in other sectors too (e.g., lab-on-a-chip, LIDAR technology or quantum computing).

EXFO has worked closely with this fast-paced PIC industry and community over the years to develop test and measurement (T&M) hardware and software solutions that are automated, scalable, fast, accurate and cost-optimized. These solutions range from simple optical testing to spectral optical characterization or traffic analysis. EXFO also offers an extensive selection of probe stations for wafer, bar, multi-die or single die configurations, and a powerful automation software suite.

Through memberships in consortiums, EXFO has partnered with major vendors worldwide to offer integrated solutions for testing PICs. EXFO has partnered with major vendors worldwide - picture

New technology, new challenges

The rise of integrated photonics brings complex, new challenges in R&D and in the maturation iterations towards the commercial success of a product. Testing is a critical aspect, as it represents most of the cost of the product and its outputs are consumed at all life cycle stages—from design and development, through qualification and validation to production.

Automation is key in this regard. However, repeatability, scalability and parallelization of the testing processes are also needed for the massive volume of circuits and ports, in view of meeting the profitability of economies of scale that photolithography fabrication promises.

It can also be tricky to keep up with evolving optical test requirements and to equip photonics labs accordingly for testing active (i.e., emitting light) or passive (i.e., guiding light) optical components. You may be asking yourself: what spectral testing capabilities should I be looking for right now or in the near future? How can I obtain traffic analysis for PICs?  Read on to explore solution avenues.

Automate and accelerate testing for PIC and optical components, from design to test and validation

Automate and accelerate testing for PIC and optical components, from design to test and validation

Design and manufacturing of PIC dies is maturing fast, with photonic wafers now containing thousands of components made available by foundries through process design kits (PDKs). To create and update these PDKs, wafer manufacturers require reliable testing solutions to optimize the different parameters of interest for a given optical component.  

Testing is a crucial step after design and manufacturing to provide feedback to the design tools and help optimize them. It is also needed for process control, to ensure that devices operate as expected throughout the assembly and packaging of the PIC chips. The PIC devices are usually tested at the wafer level prior to dicing so as to detect defects as early as possible and to avoid packaging defective dies. 

Using a PIC wafer probe station, light can be coupled in and out of each chip using specially designed optical fiber hardware and high-precision alignment software. It is also possible to couple several components simultaneously using a fiber array. Precision alignment and speed allow coupling optimization within a fraction of a second.

PILOT software view

PILOT software view: The PILOT Station App orchestrate full testing automation for wafers or multiple dies. 

Once the light is coupled into the wafer, the optical characteristics of the DUT can be measured. Testing photonic devices is at the heart of EXFO’s expertise; the CTP10 specifically addresses key PIC measurement challenges. EXFO's PIC testing solutions can measure optical components quickly, reliably and accurately.

testing wafers multiple dies single dies

Accelerating photonics lab to fab

The OPAL series of probe stations deliver industry-leading performance for testing wafers, multiple dies or single dies relating to integrated photonics. With possibilities to perform trench coupling on wafer and flexibility of reconfiguration, the stations enable accurate, repeatable and fast measurement. The PILOT software suite enhances each station by offering automation capabilities that support the full test flow (preparation through measurement to results analysis), using EXFO’s or third-party T&M instruments.

Related resources:

Automated PIC testing  

The OPAL single die test station for integrated photonics consists of a 4-axis stage and chuck with probe heads both for optical testing (optical fibre array) and electrical testing (DC/RF probes). The station includes a top and side vision system as well as a server-grade PC and a license to an automation software suite that links directly to a database. It offers fully automated optical probe navigation at the die level and manual electrical probing. When combined with the advanced optical measurements capabilities of EXFO’s product line of optical instrumentation, this system provides an unmatched solution for optical spectrum analysis as well as electrooptic testing such as BER. Together with the PILOT automation software suite, the OPAL-SD station becomes a complete, flexible and scalable solution. The OPAL single-die station is part of a larger family of test stations and can be used as a stepping stone to increase throughput capabilities. EXFO’s multi-die and wafer stations share many of the OPAL-SD elements, particularly the probe heads, vision system and more importantly, the PILOT software—allowing flexible migration from single-die testing to wafer characterization.

Active optical components

Testing active components such as lasers and amplifiers found on PICs is usually done using an optical spectrum analyzer (OSA). This general-purpose test instrument measures the spectral signal of the sources, as shown below.Active optical components

Industry-leading OSAs, such as the OSA20, have the advantage of being very fast, performing up to five scans per second at speeds of 2000 nm/s, fast enough for real-time component alignment and with a high enough resolution to allow measurement of key parameters such as OSNR and SMSR.

Testing passive components

Testing PIC-based passive components is often challenging due to the high port count of some components like arrayed waveguide grating (AWG) or the sheer number of components to test on a single die. A component test platform is a multiport detection system that operates in conjunction with a continuously tunable laser to measure optical insertion loss, return loss and polarization-dependent loss across the laser’s spectral range. The method yields optical spectrum quickly and with a high wavelength resolution, typically on the order of a picometer.

The CTP10 is a modular component test platform that operates together with the T200S or T500S continuously tunable lasers. The CTP10 characterizes the spectral properties of high port count devices in one single scan with high spectral resolution and a 70-dB dynamic range, even at a sweep speed of 200 nm/s. The CTP10 operates from 1240 to 1680 nm and covers a wide range of applications, including telecom, sensing and LIDAR. The instrument allows for both optical and photocurrent measurements with analog output possible for PIC first-light search and coupling optimization. Its electronics and internal processor make data transfer a breeze. The CTP10 can be remotely controlled using SCPI commands, facilitating integration as part of an automated PIC testing setup, increasing PIC testing throughput while reducing test time. The high sampling resolution down to 20 fm of the CTP10 enables the accurate measurement of narrow spectral features, such as the resonances of high-Q ring resonators (see example below), that have applications in modulators and sensors.

 resonances high-q ring resonators – see the GUI in action

For the characterization of PIC components with a limited number of outputs, the CT440 is a more compact solution. The CT440 has the same wavelength accuracy and spectral coverage as the CTP10 and can perform IL/PDL measurements.

Reconfigurable tests

When testing hundreds or even thousands of components on a single wafer, automation quickly becomes essential. This is particularly the case considering that optical functionalities may vary from device to device or from die to die. As a result, PIC test solutions need to address fast reconfiguration of port connectivity using automated optical switches. Additionally, simpler, single-point tests may also be beneficial to the overall speed of the test and measurement (T&M) process.

EXFO’s solutions address this challenge from two angles. First, through optical testing building blocks (FTBx modules) for a simple laser + power meter test configuration with the possibility of adding attenuators, switches or different types of optical sources. Second, rapid yet repeatable reconfiguration with the MXS matrix switch.

Related resources :

PIC-based transceivers: Traffic analysis

Photonic integrated circuits are currently being deployed to tackle the bandwidth stress taking place in the transceiver industry. This stress is due to ever-increasing performance demands and costs pressures experienced by data centers and 5G applications.pic-based transceivers traffic analysis

End-to-end transceiver qualification requires an entire range of high-end optical and electrical testers. To help transceiver vendors ensure compliance throughout the transceiver lifecycle, EXFO offers a range of electrical and optical testing solutions from wafer-level to packaged devices, including the EA-4000 sampling scope and the BA-4000 bit error rate tester.

To learn more about bit-error-rate testers and sampling scopes, download and browse our flyer.

Data-driven test automation

Turnkey solution for photonics integrated circuits

Key benefits

Improve production yield with R&D-grade solutions that rapidly provide best-in-class measurements.

Applications

Active and passive component testing
Mach-Zehnder modulator characterization
Ring resonators spectral measurement
Transceiver: transmission laser testing

Resources

All resources
Promotional videos
Accelerating photonics lab to fab with Aerotech, EHVA and EXFO - English (May 18, 2023)
Promotional videos
Automated wafer-level testing of photonic integrated circuits - English (May 18, 2023)
Flyers and pamphlets
Testing photonics and optical components for manufacturing, design and research challenges - English (June 20, 2023)
Flyers and pamphlets
Testing photonics and optical components for manufacturing, design and research challenges - 中文 (June 20, 2023)
Flyers and pamphlets
Testing photonics and optical components for manufacturing, design and research challenges - 日本語 (June 20, 2023)
Promotional videos
Comprehensive testing of integrated photonics from lab to fab - English (September 11, 2023)
Promotional videos
Discover EXFO's comprehensive PIC testing solution - English (May 18, 2023)
Brochures and catalogs
Optical testing solutions for manufacturing and R&D - English (October 27, 2023)
Brochures and catalogs
Optical testing solutions for manufacturing and R&D - 中文 (October 27, 2023)
Brochures and catalogs
Optical testing solutions for manufacturing and R&D - 日本語 (October 27, 2023)
Flyers and pamphlets
High-power continuously tunable laser series - English (March 14, 2023)
Flyers and pamphlets
High-power continuously tunable laser series - Français (March 14, 2023)
Flyers and pamphlets
High-power continuously tunable laser series - 中文 (March 14, 2023)
Flyers and pamphlets
High-power continuously tunable laser series - 日本語 (March 14, 2023)
Flyers and pamphlets
Leading-edge transmission testing up to 800G - English (October 26, 2021)
Flyers and pamphlets
Leading-edge transmission testing up to 800G - 中文 (October 26, 2021)
Flyers and pamphlets
Leading-edge transmission testing up to 800G - 日本語 (October 26, 2021)
Spec sheet
OPAL-EC – Edge-coupling wafer-level test station - English (July 19, 2024)
Spec sheet
OPAL-EC – Edge-coupling wafer-level test station - 中文 (July 19, 2024)
Spec sheet
OPAL-EC – Edge-coupling wafer-level test station - 日本語 (July 19, 2024)
Spec sheet
OPAL-EC – Edge-coupling wafer-level test station - Français (July 19, 2024)
Spec sheet
OPAL-SD – Single-die testing - English (April 22, 2024)
Spec sheet
OPAL-SD – Single-die testing - Français (April 22, 2024)
Spec sheet
OPAL-SD – Single-die testing - 中文 (April 22, 2024)